Autowatch Ghost Immobiliser Installation
The Ghost is the most advanced aftermarket in the UK. immobiliser for the CAN bus. It's discrete, doesn't employ LED indications or key fobs and is concealed in the vehicle's wiring.
The user can also disable the system for a short period of time by using Transport Mode when renting their vehicle. This guide will walk you through the installation process of a Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your vehicle from key hacking attacks, cloning and relay attacks. The system is directly connected to your vehicle's ECU and is secured by a unique PIN code that you can choose. It is inaccessible to thieves using diagnostic scanners or other modern methods. It cannot be disabled by cutting circuits.
The system is easy to use, but it is essential to have a an expert installation to ensure a secure and secure connection to your vehicle's ECU. Installers who are approved by Thatcham can assist you with the installation and programing of your Ghost system. They can also suggest an alarm or tracking system to complete the protection package for your vehicle.
To avoid an accidental deployment of airbags or short circuits, the installer must first disconnect your battery. Once the battery is disconnected, the installer may be able to work safely. Basic hand tools can be used for precise connections. A multimeter is a great tool to check electrical values. Cable ties and insulation tape are also essential for protecting connections and keeping wiring tidy. Lastly, the user manual provides specific guidance specifically tailored to the Ghost Immobiliser model you have.
During the installation, it is crucial to select a grounding point that's free of any paint or debris. The installer should also make sure the immobiliser's CAN H and CAN L wires are connected to the correct ports on the vehicle's ECU. Depending on the model, these wires may need to be soldered or plugged into. To ensure a reliable and long-lasting connection it is recommended that you use a high-quality plug.
Transport Mode can be activated by the client after the installation is complete. This allows valet parking or mechanics to use the vehicle without knowing the pin code. To do this, the customer has to press the service button on the dashboard five times in the space of two seconds. The system will confirm this by displaying 5 indicators.
The Autowatch Ghost 2 immobiliser is TASSA certified and is an extremely efficient immobiliser. It's a great choice for those who rent their vehicles regularly on platforms such as Turo. Immobilisers can also reduce insurance premiums, since it reduces the likelihood of theft.
Getting Started
If you are looking for a solution that will secure your vehicle from thieves, you can't go wrong with an autowatch ghost immobiliser. It prevents your car from running even the case that someone steals or copies your key. It is possible because of its advanced technology, which prevents the engine from starting until the right PIN code has been entered.
The device is connected to the vehicle's bus system CAN, allowing direct communication with the ECU. It makes use of the buttons on your dashboard and steering wheel to create a unique sequence, which only you are aware of. This makes it impossible for anyone else to start your car. This is the best way to protect your pride and joy. It will keep its value intact should you ever decide to sell it.
Installing a ghost immobiliser can be an easy procedure, but it's important to follow the instructions carefully to avoid problems with the electrical system and malfunctions. First, you must find and locate a permanent 12V power source and an adequate grounding point on the chassis of your vehicle. After that, you are able to begin connecting the wires for the immobiliser. Be sure to use high-quality connectors and soldering methods to ensure a strong connection. Insulate the connections using heat shrink tubing, insulation tape or other materials to prevent electrical short circuits.
Once the wires are connected, you can connect the battery and start the engine to test the function of the immobiliser. When everything is functioning correctly then you can put it in a secure place beneath the dash or anywhere else in the vehicle. Be sure to cover it well to prevent thieves from getting into it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) verified This means it meets the highest standards of security and is a fantastic deterrent to car thieves. It is invulnerable to key cloning and hacking and cannot be disabled without the code. The device is also easy to use and can be set into the service valet mode to ensure that your vehicle isn't activated if you bring it in for service or an MOT.
Wiring
The Ghost Immobiliser, a cutting technological security system, has been designed to deter theft of vehicles. It communicates with your vehicle's ECU and directly connects to its CAN bus. In contrast to other aftermarket systems that require the removal of circuit components The Ghost Immobiliser does not interfere with the factory settings for your vehicle.
It's also undetectable to thieves using diagnostic scanners. This is because the system does not transmit and receive radio frequency signals, and it uses CAN data to communicate with your ECU. It also doesn't require modifications to your current key fobs.
Enter the sequence to disarm (either two or one buttons) and turn on the ignition of your car to activate Ghost Immobiliser. The indicator will flash twice to confirm that you've entered the correct code. After that, you are able to start your car and drive away with peace of mind.
Once installed, Ghost Immobiliser protects your car against key cloning or hacking while also protecting its value. If you ever need to surrender your vehicle to a valet or service provider, the Ghost Immobiliser can be temporarily disabled in Transport Mode.
To complete a Ghost Immobiliser installation, you'll need to find the source of power that is constant (12V) and an earthing point. Make sure both are properly insulated and can be touched. Cable ties are also recommended for bundling and securing the wires. This will reduce the chance of theft by potential thieves. Make sure you check the exact location of these points to avoid mistakes and mark them with the help of tape or a label. Check all connections for signs that they are wearing out. Connections that are loose can cause problems with the system, so be sure they're securely fixed and well-insulated. Make like this to test your Ghost Immobiliser once the installation is completed. This will ensure that the unit functions correctly and that all connections are safe and well-insulated. If there are any issues, be certain to fix them immediately.
Testing
The Autowatch Ghost Immobiliser is a cutting-edge car security system that is integrated into your vehicle's ECU to block the engine from starting without authorization. Its cutting-edge technology protects your vehicle from hacking and key cloning and other common methods employed by thieves to steal cars. The Ghost is also able to work in conjunction with existing alarm and tracking systems to offer the best protection for your vehicle. This system's unmatched features and secluded design make it a preferred choice for car enthusiasts and security-conscious drivers too.
To ensure the proper integration of the Ghost Immobiliser, you must to follow all steps of the installation process. The best way to begin is to look over the wiring diagram of your vehicle that serves as a roadmap for locating and connecting the required wires. The next step is to identify the power source and grounding points. Once you have located them, you'll be required to mark the points to make them easy to identify during installation. It is essential to use top-quality materials and tools. Basic hand tools can assist you in making precise connections. A multimeter will check electrical values, and ensure safety. Cable ties and insulation tape will keep the connections neat and tidy. Additionally, a user's manual will provide specific guidance tailored to your Ghost model.
It is crucial to test the system before installing it. Enter the PIN code into the system, and then start the vehicle. This test will verify that the immobiliser is working as it should and stop unauthorised vehicle starts. ghost immobilisers is recommended that you perform this routinely as part of your regular inspections of your vehicle to ensure that the system is operating properly.
After the installation has been completed, you can start driving your car with confidence. The Ghost will keep your pride and joy secure from thieves who might steal it and ensure that nobody is able to drive off with your vehicle without the correct PIN code. The Ghost can be linked to an approved Thatcham tracker that detects any attempts at theft or tampering. This will allow you to locate your car if it's stolen.
The Ghost can be utilized in a variety of vehicles and is compatible with the majority of major manufacturers. Monty's Locksmith can assist you in securing your vehicle with this cutting edge device. Contact us today to learn more about our service and installation options. We are a TASSA registered installer, a certificate that ensures that we adhere to strict standards in the installation of our products. This ensures customers as well as insurance companies and law enforcement agencies that installations are done safely and in a safe manner.